Les tubes en acier classés comme qualité douce, EN 10219 S355JOH Steel Grade RHS, sont couramment utilisés. Le faible coût de ce tube rectangulaire en acier au carbone EN 10219 S355JOH à faible teneur en carbone le distingue de la plupart des autres tuyaux en acier. En conséquence, le tube rond en acier au carbone EN 10219 S355JOH s’avère être un substitut à un prix raisonnable. Chimiquement, notre usine produit des tubes S355JOH avec une teneur maximale en carbone de 022 %. Cette nuance spécifique d’acier EN 10219 S355JOH pour sections creuses structurelles finies à chaud a une combinaison de max. 16 pour cent de manganèse dans son alliage en plus du carbone. Cela indique que le tuyau carré fini à chaud en acier S355JOH EN 10219 peut être formé et façonné assez facilement.
Ces tuyaux S355JOH ont été produits dans notre usine en utilisant la spécification EN. Cette qualité de tuyaux à section creuse en acier EN 10219 S355JOH est connue sous le nom de tuyaux cs ou ms dans le monde commercial. La dureté de surface des tubes à section creuse en acier à faible teneur en carbone EN 10219 S355JOH peut être augmentée en les carburant, même si on ne pense pas qu’ils soient aussi durs que les tubes en acier à haute teneur en carbone. Les conditions techniques de livraison de ces tubes en profilés creux formés à chaud ou recuits en acier de construction sont régies par la norme européenne Acier S355JOH EN 10219 Tube Carré acier grade 1. Sauf si notre client demande une finition de surface différente, cette nuance En 10219 Din 2395 S355JOH RHS est normalement vernie pour éviter l’oxydation de l’acier pendant son stockage. Chaque tuyau fabriqué dans notre usine, y compris le tuyau en acier EN 10219 S355JOH, porte un numéro de chaleur estampé en dur sur chaque longueur aléatoire, garantissant une certification complète.
Qualité matérielle | S355JOH |
Normes EN | EN 10219 |
Diamètre extérieur (OD) | 21,3 à 457,2 mm |
Épaisseur du mur | 1,8 à 14,27 mm |
Plage de dimensions circulaires | 26,9 – 323,9 millimètres |
Plage de dimensions carrées | 25×25 – 300×300 millimètres |
Plage de dimensions rectangulaires | 40×20 – 400×200 millimètres |
Longueur | 6000 – 12 000/18 000 mm |
Matériel | Type de désoxydation a | % en | ||||||
---|---|---|---|---|---|---|---|---|
Grade | DEPUIS | C | Et | Mn | P. | S | N b | |
S355J0H | 1,0547 | FR | 0,22 | 0,55 | 1,60 | 0,035 | 0,035 | 0,009 |
S355J2H | 1,0576 | FR | 0,22 | 0,55 | 1,60 | 0,030 | 0,030 | — |
Matériau en acier |
Limite d’élasticité minimale |
Résistance à |
Allongement minimum |
Énergie d’impact minimale |
|||||
---|---|---|---|---|---|---|---|---|---|
Épaisseur spécifiée mm |
Épaisseur spécifiée |
Épaisseur spécifiée |
à |
||||||
Grade |
DEPUIS |
≤ |
> 16 |
< |
≥ 3 ≤ 40 |
≤ 40 |
-20°C |
0°C |
20°C |
S355J0H un |
1,0547 |
355 |
345 |
510-680 |
470-630 |
20 c |
– |
27 |
– |
S355J2H |
1,0576 |
27 |
– |
– |
Nuance d’acier | CEV maximum pour les épaisseurs nominales ≤40mm | |
---|---|---|
Nom de l’acier | Numéro d’acier | |
S355J0H | 1,0547 | 0,45 |
S355J2H | 1,0576 | 0,45 |
DEPUIS | DANS | BS | NFA | ASTM | COMME MOI |
1,0547 | EN 10210-1 Catégorie S355JOH | – | – | – | – |
Dimensions | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
bxh | (mm) | 1.4 | 1,5 | 1.6 | 1.8 | 2 | 2.2 | 2.3 | 2.5 | 2.6 | 2.8 | 2.9 | 3 | 3.2 | 3.5 | 3.6 | 3.8 | 4 | 4.5 | 5 | 5.5 | 6.0 | 6.5 | 7 | 7.5 | 8 |
dix | 20 | 0,595 | 0,632 | 0,669 | 0,741 | 0,735 | ||||||||||||||||||||
15 | 25 | 0,814 | 0,868 | 0,920 | 1.023 | 1.049 | 1.132 | 1.171 | 1.247 | |||||||||||||||||
20 | 30 | 1.034 | 1.103 | 1.171 | 1.306 | 1.363 | 1.477 | 1.532 | 1.640 | 1.692 | 1.793 | 1.842 | 1.890 | |||||||||||||
20 | 40 | 1.254 | 1.339 | 1.422 | 1.588 | 1.677 | 1.822 | 1.893 | 2.032 | 2.100 | 2.233 | 2.297 | 2.361 | |||||||||||||
30 | 40 | 1.991 | 2.168 | 2.254 | 2,425 | 2.508 | 2.672 | 2.753 | 2.832 | |||||||||||||||||
30 | 50 | 2.305 | 2.513 | 2.616 | 2.817 | 2.916 | 3.112 | 3.208 | 3.303 | 3.490 | 3.763 | 3.852 | 4.027 | 4.198 | ||||||||||||
30 | 60 | 2.619 | 2.859 | 2.977 | 3.210 | 3.325 | 3.551 | 3.663 | 3.774 | 3.993 | 4.313 | 4.417 | 4.624 | 4.826 | ||||||||||||
40 | 50 | 2.619 | 2.859 | 2.977 | 3.210 | 3.325 | 3.551 | 3.663 | 3.774 | 3.993 | 4.313 | 4.417 | 4.624 | 4.826 | ||||||||||||
40 | 60 | 2.933 | 3.204 | 3.338 | 3.602 | 3.733 | 3.991 | 4.119 | 4.25 | 4,495 | 4.862 | 4.983 | 5.22 | 5.454 | ||||||||||||
40 | 80 | 3.561 | 3.895 | 4.060 | 4.387 | 4.549 | 4.870 | 5.029 | 5.187 | 5.500 | 5.961 | 6.113 | 6.413 | 6.710 | ||||||||||||
40 | 100 | 6.129 | 6.505 | 7.060 | 7.243 | 7.607 | 7.966 | |||||||||||||||||||
50 | 100 | 6.600 | 7.007 | 7.61 | 7.809 | 8.203 | 8.594 | 9.552 | 10.484 | |||||||||||||||||
60 | 80 | 6.129 | 6.505 | 7.060 | 7.243 | 7.607 | 7.966 | |||||||||||||||||||
60 | 100 | 7.071 | 7.509 | 8.159 | 8.374 | 8.800 | 9.222 | 10.258 | ||||||||||||||||||
60 | 120 | 8.013 | 8.514 | 9.258 | 9.504 | 9.993 | 10h48 | 11h67 | 12.84 | |||||||||||||||||
60 | 140 | 8.955 | 9.519 | 10.36 | 10.63 | 11.19 | 11.73 | 13.08 | 14h41 | 15.71 | 16,98 | |||||||||||||||
80 | 100 | 8.013 | 8.514 | 9.258 | 9.504 | 9.993 | 10h48 | 11h67 | 12.84 | |||||||||||||||||
80 | 120 | 8.955 | 9.519 | 10.36 | 10.63 | 11.19 | 11.73 | 13.08 | 14h41 | 15.71 | 16,98 | |||||||||||||||
80 | 160 | 10.84 | 11h53 | 12.56 | 12h90 | 13.57 | 14h25 | 15.91 | 17h55 | 19h16 | 20h75 | 22.02 | 23.51 | |||||||||||||
100 | 140 | 10.84 | 11h53 | 12.56 | 12h90 | 13.57 | 14h25 | 15.91 | 17h55 | 19h16 | 20h75 | 22.02 | 23.51 | |||||||||||||
100 | 180 | 12.72 | 13.54 | 14h75 | 15.16 | 15.96 | 16.76 | 18.74 | 20.69 | 22.62 | 24h52 | 26.11 | 27.91 | 29.68 | ||||||||||||
100 | 200 | 13.67 | 14.54 | 15h85 | 16h29 | 17h15 | 18.01 | 20h15 | 22.26 | 24h34 | 26h40 | 28h15 | 30.11 | 32.04 | 33,94 |
Dimensions en mm | kg/m | Dimensions en mm | kg/m |
20x20x2.5 | 1,35 | 20x20x2.0 | 1.12 |
25x25x2.0 | 1,43 | 25x25x1.5 | 1.06 |
25X25X3.0 | 2.04 | 25X25X2.5 | 1,74 |
30X30X2.5 | 2.14 | 30X30X2.0 | 1,68 |
40x40x1.5 | 1,81 | 30X30X3.0 | 2.51 |
40x40x2.5 | 2,92 | 40x40x2.0 | 2.31 |
40x40x4.0 | 4.46 | 40x40x3.0 | 3.45 |
50x50x1.5 | 2.28 | 40x40x5.0 | 5h40 |
50x50x2.5 | 3,71 | 50x50x2.0 | 2,93 |
50x50x4.0 | 5,72 | 50x50x3.0 | 4.39 |
60x60x3.0 | 5.34 | 50x50x5.0 | 6,97 |
60x60x5.0 | 8.54 | 60x60x4.0 | 6,97 |
70x70x3.0 | 6.28 | 60x60x6.0 | 9h45 |
70x70x5.0 | 10.11 | 70x70x3.6 | 7.46 |
70x70x8 | 15h30 | 70x70x6.3 | 12h50 |
80x80x3.0 | 7.22 | 75x75x3.0 | 7.07 |
80x80x5.0 | 11h70 | 80x80x3.6 | 8.59 |
90x90x3.0 | 8.01 | 80x80x6.0 | 13h90 |
90x90x5.0 | 13h30 | 90x90x3.6 | 9.72 |
90x90x8.0 | 20h40 | 90x90x6.0 | 15.76 |
100 x 100 x 4,0 | 12h00 | 100 x 100 x 3,0 | 8,96 |
100 x 100 x 5,0 | 14h80 | 100 x 100 x 5,0 | 14h80 |
100 x 100 x 8,0 | 22h90 | 100 x 100 x 6,0 | 16h19 |
120x120x5 | 18h00 | 100x100x10 | 27.90 |
120X120X6.3 | 22h30 | 120 x 120 x 6,0 | 21h30 |
120x120x10 | 34.20 | 120 x 120 x 8,0 | 27.90 |
120X120X12.5 | 41,60 | 120X120X12 | 35,8 |
140X140X6.3 | 26h30 | 140X140X5.0 | 21h10 |
140X140X10 | 40h40 | 140X140X8 | 32,90 |
150X150X5.0 | 22h70 | 140X140X12.5 | 49.50 |
150X150X8.0 | 35h40 | 150X150X6.3 | 28h30 |
150X150X12.5 | 53.40 | 150X150X10 | 43.60 |
150X150X16 | 66.40 | 150X150X16 | 66.40 |
180X180X6.3 | 34.20 | 180X180X5 | 27h40 |
180X180X10 | 53h00 | 180X180X8 | 43h00 |
180X180X16 | 81.40 | 180X180X12.5 | 65.20 |
200X200X6 | 35,8 | 200X200X5 | 30h50 |
200x200x8 | 48h00 | 200 x 200 x 6,3 | 38.2 |
200 x 200 x 12,5 | 73h00 | 200x200x10 | 59h30 |
250 x 250 x 6,3 | 48.10 | 200x200x16 | 91.50 |
250x250x10 | 75.00 | 250x250x8 | 60,50 |
250x250x16 | 117.00 | 250 x 250 x 12,5 | 92,60 |
300x300x8 | 73.10 | 300 x 300 x 6,3 | 57.90 |
300x300x8 | 90.70 | 300x300x10 | 57.90 |
300x300x16 | 142,00 | 300 x 300 x 12,5 | 112.00 |
350x350x10 | 106.00 | 350x350x8 | 85,70 |
350x350x16 | 167,00 | 350 x 350 x 12,5 | 132,00 |
400 x 400 x 12 | 141,00 | 400x400x10 | 122,00 |
400 x 400 x 16 | 192 | 400 x 400 x 12,5 mm | 152,00 |
Tuyau en acier Schedule 40 S355JOH EN 10219 | Tuyau ASME B36.19 DIN 59411 En 10219 S355JOH |
Tuyau en acier S355JOH EN 10219 Schedule 10 | Tuyau à double paroi en acier EN 10219 S355JOH |
Tuyau sans couture en acier EN 10219 S355JOH | Tuyau sans soudure en acier noir S355JOH EN 10219 |
Tuyau soudé en acier EN 10219 S355JOH | S355JOH En 10219 Partie 2 Tuyau ovale |
MMRD Colony Chembur Extension, Mumbai, Maharashtra, India 400074
Copyright © 2023 Heer Metalloys. Tous droits réservés